Troubleshooting - Dometic BORDBAR AS 25 Instrucciones De Uso

Troubleshooting

9 Troubleshooting
Fault
Your cooler does not
work (plug is inserted).
The cooler does not cool
(plug is inserted).
Operation with a 12 V
socket (cigarette lighter):
The ignition is on and the
cooler is not working.
Pull the plug out of the
socket and make the
following checks.
14
Possible cause
There is no voltage
flowing from the 12 V
socket (cigarette
lighter) in your vehicle.
No voltage present at
the AC voltage socket.
The inner fan or the
cooling element is
defective.
The cigarette lighter
socket is dirty. This
results in a poor elec-
trical contact.
The fuse of the 12 V
plug has blown.
The vehicle fuse has
blown.
Suggested remedy
The ignition must be switched on in
most vehicles for voltage to flow at the
cigarette lighter.
Try using another plug socket.
This can only be repaired by an
authorised customer services unit.
If the plug of your cooler becomes very
warm in the cigarette lighter socket,
either the socket must be cleaned or
the plug has not been assembled
correctly.
Replace the fuse (5 A) in the 12 V plug
(fig. 3 1, page 3).
Replace the vehicle's 12 V socket fuse
(usually 15 A). (Please refer to the
operating manual of your vehicle.)
BordBar AS25
EN