Dometic MS 880 Instrucciones De Montaje página 17

MS880
7.3 Installing the clutch switch
I
NOTE
Check whether your vehicle features a clutch switch. If it does, you do
not have to install the clutch switch supplied.
Install the clutch switch as follows (fig. 8, page 7):
➤ Fasten the magnet (fig. 8 1, page 7) to the clutch pedal using double-sided
adhesive tape or cable binders.
➤ Fasten the clutch switch (fig. 8 2, page 7) in the footwell using the screws
supplied or double-sided adhesive tape.
➤ Connect the 2-pole clutch switch compact plug (fig. 8 2, page 7) with the
2-pole compact plug on the cruise control cable set.
I
NOTE
On vehicles with manual transmission, you can use the clutch switch to
prevent engine overspeed. The cruise control switches off automatically
when you press down the clutch.
EN
Installing MagicSpeed
17