Operation
5
Operation
5.1
Control unit
I
NOTE
The control unit stays in stand-by mode for up to 12 hours after the vehicle igni-
tion is switched off and the ignition key is removed.
After this time, the control unit must be switched on again after starting the
engine. Within 12 hours, the refrigeration system switches back on automati-
cally if it was on when the vehicle was switched off.
All of the refrigeration system's functions are controlled via the control unit. All
relevant values and settings are shown on the integrated display.
1
Fig. 1: Overview of control unit, buttons
The following functions are controlled with the buttons:
No. in
fig. 1
1
2
3
4
5
6
1
P
5
Button
Function description
Switches the refrigeration system on and off
Display:
•
Display of the current temperature in the
•
Displays additional information
•
Displays current error messages
•
Changes the target temperature
•
Increases values
•
Acknowledges warning signals
•
Changes the target temperature
•
Reduces values
•
Programming button
P
•
Starts manual defrosting
2
Frigo DC
3
4
cargo space
EN