Bartscher 590LW Instrucciones De Uso página 39

•
To avoid damage of the condenser during positioning or transportation, do not
lean the device at angle more than 45º.
•
Do not place the device close to open fire, electric stoves, heating stoves or other
sources of heat such as sunshine. High temperature may damage the surface of
the device and have adverse impact on cooling capacity or energy consumption.
•
When positioning the device remember that the ambient temperature should not
exceed max. 30 ° C.
•
Place the device in the way so that the relevant air circulation is secured. Leave
the gap of at least 5 cm between the deviced and walls or other devices.
•
Never cover or obstruct the ventilation grid of the device.
•
Do not locate the device in a place with high humidity. The relative humidity in the
place should not exceed max. 55 %. Higher humidity may have an adverse impact
on the cooling performance of the device due to frost forming on the evaporator.
•
You must not drill any openings or fix other objects onto the device.
•
Do not place any heavy objects on the device.
•
Position the device so that the power plug is available to immediately unplug the
device from the mains, if needed.
Power supply
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of compliance!
Connect the device only to properly installed single socket
with protective terminal.
•
Before connecting the device to the power supply for the first time and starting its
operation leave the device for at least 2 hours to let the cooling equilibrate to avoid
failures.
•
In the event of power supply cut or unplugging, do not plug in the device for at
least 5 minutes.
•
The electric socket should be provided with 16A circuit breaker. Only plug in directly
to the wall socket. You must not use any adapter or extension block.
- 35 -