Maurer Elektromaschinen Acctiva Professional Flash Instrucciones De Uso página 54

Troubleshooting
Troubleshooting
Charging terminals connected to wrong poles
Cause:
Remedy:
Charging terminals short-circuited
Cause:
Remedy:
Cause:
Remedy:
Over-temperature
Cause:
Remedy:
Cause:
Remedy:
Safety cut-out
Cause:
Remedy:
Cause:
Remedy:
Cause:
Remedy:
Fan blocked/faulty
Cause:
Remedy:
Cause:
Remedy:
Charger faulty
Cause:
Remedy:
Charging terminals connected to wrong poles
Swap charging terminals round
Short-circuit on the charging terminals
Rectify short-circuit on the charging terminals
Battery not detected
Check that charging terminals are properly connected, press Start/Stop
button for 5 seconds
Over-temperature - charger too hot
Allow charger to cool down
Air inlets and outlets covered
Ensure air inlets and outlets are not obstructed
Battery faulty
Check battery
Charger incorrectly set
Check settings: Ah, voltage
Incorrect battery type (e.g. NiCd), incorrect number of cells (voltage)
Check battery type
Fan blocked
Check air inlet, remove foreign bodies if necessary
Fan faulty
Contact specialist dealer
Charger faulty
Contact specialist dealer
18