Device Version Submenu (Hardware And Firmware Version); Delay Time Submenu (Delay Time) - Maurer Elektromaschinen Acctiva Professional Flash Instrucciones De Uso

DELAY TIME
submenu
(delay time)
1.
2.
3.
Important! Delay time must be set again after each cycle. If the power fails, the count-
down stops. Once the power is restored, the countdown continues where it left off.
DEVICE VERSI-
ON submenu
(hardware and
firmware version)
1.
2.
3.
Access the submenu
Set delay time. Setting range: 0 - 4 h (can be set in increments of 10 min)
Save the selected time and exit the submenu
Access the submenu
Toggle between hardware version and firmware version displays by pressing the info
button.
Exit the submenu
17