Sears Kenmore 2800 010 Serie Manual De Uso página 10

f6. Add fabric softener to dispenser
Fabric softener tray
8e Press POWER to turn on washer
POWER
Pour a measured amount of liquid fabric
softener into tray; always follow manufacturer's directions
for correct amount of fabric softener based on your load size.
Close dispenser drawer, then select Fabric Softener option.
iMPORTANT: Fabric Softener option must be selected to
ensure proper distribution at correct time in cycle. Do not
overfill or dilute. Overfilling dispenser will cause fabric
softener to immediately dispense into washer.
If 2nd Rinse option is selected, fabric softener wJJJbe
dispensed into the last rinse.
It is normal for a small amount of water to remain in the
dispenser at the end of a cycle.
Oxi-Booster tray
Pour a measured amount of Oxi-booster into
tray; always follow manufacturer's directions for
correct amount of Oxi-booster based on your load size.
Close dispenser drawer, then select TimedOxi option.
iMPORTANT: TimedOxi option must be selected to ensure
proper distribution at correct time in cycle. Do not overfill
or dilute. Overfilling dispenser will cause Oxi=booster to
immediately dispense into washer.
Make sure the dispenser drawer is closed completely, then
press POWER to turn on the washer.
_9.
Select cycle
WASH CYCLES
Normal
Bulky Casual
Heavy Duty Delicates
Alierge_ Express
Whites
Soak
Clean
Washer
with bleach
Rinse/Spin
Drain/Spin
Turn cycle knob to choose your wash
cycle. The indicator for Estimated Time Remaining will light up
with a cycle time. For more information, see "Control Panel".
l Oe Select cycle settings
Hot
Ex Heavy
Heavy
Normal
Light
High
Low
No Spin
Once you select a cycle, the default settings for that cycle
will be lit. Press the cycle modifier buttons to change the
Wash Temp, Soil Level, and Spin Speed, if desired.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
IO