Yamaha DS2416 Manual De Instrucciones página 160

162
Effects Parameters
DELAY->REV (delay and reverb in series)
Parameter
DELAY L
DELAY R
FB.DLY
FB.GAIN
DELAYHI
REV TIME
INI.DLY
REV HI
DIFF.
DENSITY
HPF
LPF
DLY BAL
DIST->DELAY (distortion and delay in series)
Parameter
DST TYPE
DRIVE
MASTER
TONE
N.GATE
DELAY
FB.GAIN
HI.RATIO
FREQ.
DEPTH
DLY BAL
DS2416
Downloaded from: http://www.usersmanualguide.com/
Range
0.0–1000.0 ms Left channel delay time
0.0–1000.0 ms Right channel delay time
0.0–1000.0 ms Feedback delay time
Feedback gain (plus values for normal-phase feed-
–99 to +99%
back, minus values for reverse-phase feedback)
0.1–1.0 Delay high-frequency feedback ratio
0.3–99.0 s Reverb time
0.0–500.0 ms Initial delay before reverb begins
0.1–1.0 High-frequency reverb time ratio
0–10 Reverb diffusion (left–right reverb spread)
0–100% Reverb density
Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
Delay and delayed reverb balance (100% = delay
0–100%
only)
Range
1
Distortion type
0–100 Distortion drive
0–100 Master volume
–10 to +10 Tone control
0–20 Noise reduction
0.0–2725.0 ms Delay time
Feedback gain (plus values for normal-phase feed-
–99 to +99%
back, minus values for reverse-phase feedback)
0.1–1.0 High-frequency feedback ratio
0.05–40.00 Hz Modulation speed
0–100% Modulation depth
0–100% Level balance of delay
1. DST1, DST2, OVD1, OVD2, CRUNCH (DST = distortion, OVD = overdrive)
Description
Description