Mono Delay - Yamaha DS2416 Manual De Instrucciones

150
Effects Parameters
GATE REVERB, REVERSE GATE
Parameter
TYPE
ROOMSIZE 0.1–20.0
LIVENESS
INI.DLY
DIFF.
DENSITY
HI.RATIO
ER NUM.
FB GAIN
HPF
LPF

MONO DELAY

Parameter
DELAY
FB.GAIN
HI.RATIO
HPF
LPF
STEREO DELAY
Parameter
DELAY L
FB.G L
DELAY R
FB.G R
HI.RATIO
HPF
LPF
DS2416
Downloaded from: http://www.usersmanualguide.com/
Range
Type-A, Type-B Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10
0–10
= live)
0.0–500.0 ms Initial delay before reverb begins
0–10 Reverb diffusion (left–right reverb spread)
0–100% Reverb density
0.1–1.0 High-frequency feedback ratio
1–19 Number of early reflections
–99 to +99% Feedback gain
Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
Range
0.0–2730.0 ms Delay time
Feedback gain (plus values for normal-phase feed-
–99 to +99%
back, minus values for reverse-phase feedback)
0.1–1.0 High-frequency feedback ratio
Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
Range
0.0–1350.0 ms Left channel delay time
Left channel feedback (plus values for nor-
–99 to +99% mal-phase feedback, minus values for
reverse-phase feedback)
0.0–1350.0 ms Right channel delay time
Right channel feedback (plus values for nor-
–99 to +99% mal-phase feedback, minus values for
reverse-phase feedback)
0.1–1.0 High-frequency feedback ratio
Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
Description
Description
Description