Yamaha DS2416 Manual De Instrucciones página 158

160
Effects Parameters
REV->PAN (reverb and auto-pan in parallel)
Parameter
REV TIME
INI.DLY
HI.RATIO
DIFF.
DENSITY
HPF
LPF
REV BAL.
FREQ.
DEPTH
DIR.
WAVE
DELAY+ER. (delay and early reflections in parallel)
Parameter
DELAY L
DELAY R
FB.DLY
FB.GAIN
HI.RATIO
TYPE
ROOMSIZE 0.1–20.0
LIVENESS
INI.DLY
DIFF.
DENSITY
ER NUM.
DLY/ER
DS2416
Downloaded from: http://www.usersmanualguide.com/
Range
0.3–99.0 s Reverb time
0.0–500.0 ms Initial delay before reverb begins
0.1–1.0 High-frequency reverb time ratio
0–10 Reverb diffusion (left–right reverb spread)
0–100% Reverb density
Thru, 21 Hz–8.0 kHz High-pass filter cutoff frequency
50 Hz–16.0 kHz, Thru
Low-pass filter cutoff frequency
Hz
Reverb and panned reverb balance (100% = reverb
0–100%
only)
0.05–40.00 Hz Modulation speed
0–100% Modulation depth
1
Panning direction
Modulation waveform (Sine: sine wave, Tri: trian-
Sine, Tri, Square
gular wave, Square: rectaugular wave)
1. L<->R, L—>R, L<—R, Turn L, Turn R
Range
0.0–1000.0 ms Left channel delay time
0.0–1000.0 ms Right channel delay time
0.0–1000.0 ms Feedback delay time
Feedback gain (plus values for normal-phase feed-
–99 to +99%
back, minus values for reverse-phase feedback)
0.1–1.0 High-frequency feedback ratio
1
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10
0–10
= live)
0.0–500.0 ms Initial delay before reverb begins
0–10 Reverb diffusion (left–right reverb spread)
0–100% Reverb density
1–19 Number of early reflections
Delay and early reflections balance (0% = early
0–100%
reflections only, 100% = delay only)
1. S-Hall (small hall), L-Hall (large hall), Random, Revers (reverse), Plate, Spring
Description
Description