Inflation & Deflation - Seago SEAGUARD 165 Manual Del Propietário

INFLATION AND DEFLATION
INFLATION
Automatic/Manual inflation lifejacket: The lifejacket will inflate when fully immersed in
water. Automatic/Manual lifejackets can be manually inflated by grasping the manual inflation
pull tab and pulling sharply downward.
Manual inflation lifejacket: The lifejacket is manually inflated by grasping the manual
inflation pull tab and pulling sharply downward.
Oral Inflation: The oral inflation tube is located inside the cover on the wearer's left side. To
inflate orally, access the inflation tube by opening the top portion of the cover, remove the dust
cap, and below air into the tube until the lung is firm.
33g CO2 Cylinder for:
38g CO" Cylinder for:
60g CO2 Cylinder for:
DO NOT FULLY INFLATE THE LIFEJACKET ORALLY AND THEN INFLATE
WITH CO2 CYLINDER AS IRREPARABLE DAMAGE WILL OCCUR.
DEFLATION
The deflation tab is located on top of the dust cap. Turn the dust cap upside down and insert the
deflation mechanism into the oral tube. Hold the deflation mechanism in place with your finger
and gently squeeze all the air out of the lifejacket. If the lifejacket has inflated while being worn,
it may be necessary to partially deflate the lifejacket in order to remove it.
To remove all air, roll the lifejacket into a ball and squeeze while operating the deflation
mechanism. The lifejacket will be difficult to fold and re-pack properly if not completely deflated
and will result in an over pressured air chamber when inflated by the gas cylinder.
Practice wearing and adjusting your inflatable lifejacket in the water in order to be prepared for
an emergency!
Practice wearing and inflating your lifejacket using different types of clothing. Wade into the
water and manually inflate, or allow your lifejacket to inflate automatically. Practice until you
have complete confidence in the performance of your lifejacket.
SEAGUARD 165
CLASSIC 190, ACTIVE 190, 3DYNAMIC 190
ACTIVE 300, 3DYNAMIC 300
6