Zooming And Resizing The Picture - Sony DSC-1024G Manual De Instrucciones

Zooming and resizing the picture

S
ON/OFF
You can zoom up the picture making it 2 , 3 or 4 times larger
than the original size.
You can also shift the position of the picture so that it fits in the
screen, or adjust the vertical and horizontal size of the picture
separately.
The adjustments can be carried out for the three inputs
separately.
Zooming up the picture
1 Display the picture on the screen.
2 Press the ZOOM + button.
ZOOM
Each time you press the ZOOM + button, the picture is
magnified by 2, 3 and 4 times respectively.
To zoom down, press the ZOOM – button.
3 Adjust the position of the close-up picture by pressing
/ / /
the CENT ◊ √ ı ∫ buttons.
◊/√: to shift the picture upward/
downward (V CENT)
ı/∫: to shift the picture to the
right/left (H CENT)
CENT
The position of the picture is indicated on the screen by the
adjustment bar and value 0 to 100. The factory preset value is
50.
3
TV
IN NTSC PAL
PJ
OFF
OUT NTSC PAL
COMMAND DISPLAY TEST LINE OUTPUT
ON/OFF PATTERN DOUBLER FORMAT
MODE GEN-LOCK
MENU
CENT
ENTER
x1 zx2 x3 x4
ZOOM
50
V CENT
50
H CENT
OVER FLOW
SIGNAL FORMAT
31.5k 37k 48k 64k OTHERS
31.5k 37k 48k 64k
APERTURE
CHROMA PHASE CONTRAST
SIZE
H/V SIZE buttons
Resizing the picture
Press the H/V SIZE +/– buttons to resize the picture.
V SIZE +: to expand vertical size
V SIZE –: to reduce vertical size
H SIZE +: to expand horizontal size
H SIZE –: to reduce horizontal size
V
H
SIZE
V
The size of the picture is indicated on the screen by the
adjustment bar and value 0 to 100. The factory preset value is
50 (except the HDTV or 64 k input).
Aspect ratio display
As the picture size changes by the H/V SIZE button, the unit
calculates the aspect ratio of the converted picture and displays
it in decimal values on the screen together with the adjustment
bar and value.
Example: 4 : 3 is displayed 1.33 : 1
16 : 9 is displayed 1.78 : 1
Note
The aspect ratio is displayed only when the preset signal is
input. For the preset signals, see page 47.
Restoring the original picture size and position
Use GEOM RESET on the MENU 1 screen. (See page 39.)
2
OPEN SCAN CONVERTER DSC-1024G
INPUT SELECT
STILL
1 2 3
ZOOM
ZOOM – button
V SIZE
H
H SIZE
ASPECT 1.33:1
H SIZE
50
50
75
37