Assembly - Dirt Devil Galileo M8000 Manual De Instrucciones

2 Unpacking and assembling

2.2 Assembly

2
3
32
WARNING:
Danger of injury! Only assemble the appliance if it is not
click! click!
connected to the power supply. Otherwise the machine
might start up and parts of your body, hair or pieces of
clothing might be sucked in.
1. Insert the connecting tube of the suction hose into the
intake opening (Fig. 2) of the cylinder vacuum cleaner
until you feel and hear it snap into place.
2. Insert the handle into the upper end of the telescopic
tube until you feel and hear the click lock snap into place
(Fig. 3).
NOTE:
When fitting the two parts together, it may be necessary
to turn them slightly counter to each other, until the you
feel and hear the click lock snap into place.
3. By slightly pulling apart, check whether handle and tel-
escopic tube are securely connected.
NOTE:
If you want to disconnect the two elements, you must
press the release catch on the telescopic tube (Fig. 3/
magnifying glass) and then pull the handle out of the
tube.