General Information; Warning Signals; Use As Directed; Danger Due To Electrical Current - Topcom BABYTALKER 1020 Manual De Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
Babytalker 1020
1

General information

This instruction manual is part of the Babytalker 1020 (hereinafter referred to as "the device"). It contains important
information about setting up the monitor, safety aspects, correct use and looking after the monitor.
The instruction manual must always be kept close by the device.
It must be read and followed by anyone responsible for operating the device, resolving faults and/or cleaning it.
Keep this instruction manual safely and if you sell the device please give it to the next owner.
1.1
Copyright
This documentation is protected by copyright.
All rights, including those of total or partial photo mechanical reproduction, duplication and distribution by means
of particular processes (such as data processing, data carriers and data networks), and substantive and technical
changes, are reserved.
1.2

Warning signals

DANGER
A warning sign of this hazard level indicates an imminent hazardous situation.
If the hazardous situation is not prevented, this could lead to death or serious injury.
WARNING
A warning signal of this hazard level indicates a possible hazardous situation.
If the hazardous situation is not prevented, this could lead to injury and/or material damage.
A note indicates additional information that will make using the device easier.
1.3

Use as directed

This device is designed only for non-commercial use in monitoring babies in enclosed spaces.
Any use that differs from this or goes beyond the specified use is regarded as incorrect.
WARNING
Danger due to incorrect use!
Incorrect use of the device, or using it for purposes for which it was not designed, can lead to danger.
Follow the instructions for use given in this manual.
Claims for damages of whatever kind as a result of incorrect use will not be accepted.
The user bears the sole risk.
2
Safety
This chapter contains important safety information regarding the use of the device.
This device meets the safety requirements laid down. However, inappropriate use can cause injury and material
damage.
2.1

Danger due to electrical current

DANGER
Contact with live cables or components can cause danger to life!
Follow the safety instructions given below in order to avoid danger due to electrical current:
Use only the power supply components included in the pack, as otherwise devices could be
damaged.
Do not use the device if the power supply unit, cable or plug are damaged.
Never open the power supply unit housing. There is a risk of electric shock if live connections
are touched or the electrical and mechanical structure of the device are altered.
Protect devices from humidity, penetration by liquids and dust. Unplug the power supply unit
immediately if the device comes into contact with liquid.
Unplug the power supply unit if a fault occurs, during a storm and before cleaning the device.
Protect cables from hot surfaces or other hazards and do not constrict them.
3
Tabla de contenido
loading

Tabla de contenido