Cooking Program" Mode - CASO DESIGN EMGS 25 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 142
If you intend to use the defrost function, this must be programmed as the first function in
the sequence.
► The automatic cooking programmes and quick start cannot be used for multi-stage
cooking.
Example: If you want to defrost food for 5 minutes and then microwave the food at 80%
power level for 7 minutes proceed as follows:
1) Press
for defrosting by time and "00:00" will be displayed .
2) Use
or
3) Press
and set the power level for microwaving to 80% until the display shows "P
80".
4) Adjust the cooking time by
5) Press
to start the multi-stage cooking process.
6) When the end of the cooking time has been reached the system will sound five signal
tones.
► Please do not confirm the time setting between programming the first and second
cooking programme because that would automatically start the first programme. After
setting the time for the first cooking programme directly enter the function for the
second cooking programme.

15.13 "Cooking Program" Mode

In this operating mode, the cooking programme can be selected from 8 different menus.
Please refer to the table on the next page for more detailed information.
1) Press
repeatedly to select the desired automatic cooking program.
2) Press
to confirm the selected programme.
3) Use
or
portions or the weight in grams will be displayed (see table below). Press
the cooking process.
4) When the end of the cookig time has been reached, the system will sound five signal
tones.
Please note
to set the defrosting time to a maximum of 95 minutes.
or
Please note
to select the weight or the desired number of portions. The number of
to 7 minutes.
to start
70
Tabla de contenido
loading

Tabla de contenido