Functions Of The Keys - Metrix MX 407 Manual De Instrucciones

The measured resistance value is displayed on the screen.
3.2 F unc tions of the keys
The functions of the
accessed by successive short or long presses. Each press is
confirmed by an audible signal.
3.2.1
key
This key is used to hold the display of the measured value, for all
positions of the switch. The HOLD symbol is displayed on the
screen.
For insulation measurements, the HOLD is activated automatically
after each measurement.
Special case when the device is started up: a long press at start-up
de-activates the automatic switching off of the device.
E ach pres s of
this length...
short
3.2.2 key
This key is used to hold the insulation measurement in permanent
mode (measurement campaigns, for example).
The symbol is displayed on the screen.
, ,
Any
 to hold the display of the
position
measured value;
 to exit from the HOLD mode .
29
keys can be
and
...serves