Flash Time; Change Pin; Eco Mode - Medion E63032 Manual De Instrucciones

Flash time

 Here you can adapt your telephone to the specifications of your network
provider or your PABX. Select one of the following settings for flash
times:

LONG

MEDIUM

SHORT
NOTE
Enquire of your network provider which settings are required for your
connection or read the operating instructions of your telephone
system.

Change PIN

You can assign a new PIN for the base station and handsets here.
 Enter the valid system PIN (factory setting is 0000) and confirm with the
left function key (OK).
 Enter a new, 4-digits PIN number and confirm with the left function key
(OK).
 Confirm the PIN by entering it again and press the left function key (OK).
The PIN for the base station has now been changed.

ECO mode

The ECO Mode setting enables low emission operation when the handset is
placed in the base.
The transmitting power is reduced to a minimum.
ON
 Select the
with the left function button (OK).
OFF
In the setting the transmission output has a slightly higher range. Use
this setting to improve reception if the transmission conditions are poor.
34
100 ms
250 ms
600 ms
OFF
or setting for the ECO mode and confirm your selection