Get Started; Install Sim Card And Battery - Nokia 3500 classic Manual Del Usuario

content already in your device. Revocation of such DRM software does not affect the use
of content protected with other types of DRM or the use of non-DRM-protected content.
DRM-protected content comes with an associated activation key that defines your rights
to use the content.
To back up OMA DRM-protected content, use the backup feature of Nokia PC Suite.
If your device has WMDRM protected content, both the activation keys and the content
will be lost if the device memory is formatted. You may also lose the activation keys and
the content in case the files on your device get corrupted. Losing the activation keys or
the content may limit your ability to use the same content on your device again. For
more information, contact your service provider.

2. Get started

Install SIM card and battery

Always switch the device off and disconnect the charger before removing the battery.
For availability and information on using SIM card services, contact your SIM card vendor.
This may be the service provider or other vendor.
This device is intended for use with a BL-4C battery. Always use original Nokia batteries.
See "Nokia battery authentication guidelines," p. 49.
The SIM card and its contacts can be easily damaged by scratches or bending, so be
careful when handling, inserting, or removing the card.
1. Push the release button (1) to
unlock and remove the back
cover (2). Remove the battery
as shown (3).
2. Open the SIM card holder (4).
Insert the SIM card (5) with
the contact surface facing
down into the holder. Close
the SIM card holder (6).
© 2007 Nokia. All rights reserved.
G e t s t a r t e d
11