Replaying Music Titles - IMG STAGELINE CD-112RDS/BT Manual De Instrucciones

2 Safety Notes
GB
This unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The unit uses dangerous mains
voltage. Leave servicing to skilled
personnel only. Inexpert handling
or modification of the unit may
result in electric shock.
Please observe the following items in any case:
G
The unit is suitable for indoor use only. Protect
it against dripping water and splash water,
high air humidity and heat (admissible ambi-
ent temperature range 0 – 40 °C).
G
Do not place any vessel filled with liquid on the
unit, e. g. a drinking glass.
G
Do not operate the unit and immediately dis-
connect the mains plug from the socket
1. if the unit or the mains cable is visibly dam-
aged,
2. if a defect might have occurred after the unit
was dropped or suffered a similar accident,
3. if malfunctions occur.
In any case the unit must be repaired by
skilled personnel.
G
Never pull the mains cable to disconnect the
mains plug from the socket, always seize the
plug.
G
For cleaning only use a dry, soft cloth; never
use water or chemicals.
G
No guarantee claims for the unit and no liabil-
ity for any resulting personal damage or mate-
rial damage will be accepted if the unit is used
for other purposes than originally intended, if it
is not correctly connected or operated, or if it
is not repaired in an expert way.
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which will not be
harmful to the environment
3 Applications
The CD-112RDS / BT is a combination of CD /
MP3 player, FM RDS tuner and Bluetooth re -
ceiver: It is suited for versatile PA applications
(e. g. in theatres, pubs or waiting rooms) and
offers special features for this purpose, e. g. con-
tinuous repeat, random replay, MP3 replay of
USB storage media and SD/ SDHC memory
cards (32 GB max.).
It is able to play audio CDs, audio CDs you
have burnt yourself (audio CD-R) and CDs with
titles in MP3 format. However, problems may
occur when replaying rewriteable CDs (CD-RW)
depending on the type of CD, the CD burner and
the burning programme used.
4 Deactivating the Automatic
Start Function
The CD player is provided with an automatic
start function: After switching on the unit and
reading in a sound carrier (CD, USB flash drive
or memory card) the replay of the first title will
start automatically. If you do not wish the unit to
start automatically [replay will not start before the
button PLAY/ PAUSE (9) is pressed], deactivate
the automatic start function.
WARNING To make this modification, the unit
must be opened by skilled person-
nel only. Inexpert handling may
result in electric shock!
10
Always disconnect the mains plug from the
socket before opening the unit!
On the PCB with the power supply unit and the
.
audio output jacks there is a jumper (see arrow
in fig. 6). The automatic start function is activated
when the jumper is in the position AUTO PLAY.
To deactivate the function, re arrange the jumper
to the position MANUAL PLAY.
5 Setting Up and
Connecting the Unit
The unit is designed for installation into a rack
(482 mm /19"); however, it can also be used as a
tabletop unit. For installation into a rack, 1 rack
space (RS = 44.45 mm) is required.
Prior to making or changing any connec-
tions, switch off the CD-112RDS / BT and the
units to be connected.
1) Four line level outputs are available to route
the audio signals to the subsequent unit (e. g.
mixer or amplifier):
PRIORITY OUT (34)
1. For the signal of the Bluetooth receiver;
the signal will take priority over the signals
of the CD / MP3 player and of the tuner.
2. When no Bluetooth signal is received or
when the replay has been set to pause,
the signal of the CD / MP3 player is present
at this output.
3. When the CD / MP3 player has been set to
pause or stop, the signal of the tuner is
present at this output.
BT OUT (35)
for the signal of the Bluetooth receiver
TUNER OUT (36)
for the signal of the tuner CD PLAYER OUT (37)
for the signal of the CD / MP3 player
2) Connect an FM antenna to the jack ANTEN-
NA (33). A basic FM antenna is supplied with
the unit.
3) Finally connect the mains cable provided to
the mains jack (38) first and then to a mains
socket (230 V / 50 Hz).
6 Operation
Switch on the player with the POWER switch (1).
The display (12) of the CD / MP3 player shows
Welcome
. The display (26) of the tuner shows
the station most recently selected.
6.1 Remote control
1) To insert the batteries (2 x 1.5 V, size AAA),
remove the battery compartment cover on
the rear side of the remote control. Insert the
batteries as indicated in the battery compart-
ment. Close the compartment with the cover.
If the remote control is not in use for a
longer period of time, remove the batteries to
prevent any damage due to battery leakage.
2) When you press a button on the remote con-
trol, always direct the remote control towards
the sensor IR (19). There must be no obsta-
cles between the remote control and the sen-
sor.
3) On the unit, the LEDs CD (10) and TUNER
(20) will indicate if it is possible to control the
CD / MP3 player or the tuner with the remote
control. To change the control, press the but-
ton CD/ TUNER (46). The red lettering on the
remote control shows the functions for the
tuner.
4) If the range of the remote control decreases,
the batteries are exhausted and must be
replaced.
Used batteries must not be placed in
the household waste; always take
them to a special waste disposal, e. g.
collection container at your retailer.
6.2 CD / MP3 player
After switching on, the CD / MP3 player will read
the CD first. If no CD has been inserted, the
player will read the USB flash drive. If no USB
flash drive has been connected, the player will
read the memory card. If no memory card
has been inserted, the display (12) will show
NO DISC
.

6.2.1 Replaying music titles

1) Insert a CD with the lettering facing up into
the slot (5) until it is pulled in automatically
and / or
connect a USB flash drive to the USB port (4)
or connect a hard disk (with individual power
supply, if required) to the USB port
and / or
insert a memory card into the slot SD / MMC
CARD (18), the notched corner of the card
facing up. To remove the card, slightly push it
in to eject the card from the slot.
2) Select the sound carrier (CD, USB flash drive,
memory card) with the button FUNC (17), if
necessary.
3) After loading the sound carrier, the first title
will start automatically. However, if the auto-
matic start function has been deactivated
(chapter 4), press the button PLAY/ PAUSE
(9) to start the first title. To select other titles
see chapter 6.2.2.
4) While replaying, the upper line of the display
will show the replay symbol
The lower line will show the number (TR ...)
of the current title and the time already played
of the title (min. : sec.). On the far right,
is shown for titles in MP3 format or
standard audio CDs.
5) For MP3 files, the following additional infor-
mation will scroll in the upper line:
File – ...
Title – ...
Artist – ...
Album – ...
Note: The file name will only be displayed after
starting the replay. If an information is not available,
NONE
the display will show instead of a name.
6) When you press the button DISPLAY (43) on
the remote control, various information for
MP3 files will be displayed in the lower line of
the display:
basic setting
The lower line will show the title number
and the time already played of the title.
first actuation of button
The folder name will be displayed.
second actuation of button
The file name will be displayed.
third actuation of button
The number of folders and the number of
titles will be displayed.
fourth actuation of button
return to basic setting
7) Press the button PLAY/PAUSE to switch be -
tween replay and pause. In the pause mode,
the pause symbol will be inserted and the
time indication will flash.
on the right.
MP3
ESP
for