Maintenance Of The Unit; Updating The Firmware - IMG STAGELINE CD-292USB Manual De Instrucciones

TACT = control via a momentary pushbutton
When the momentary pushbutton is actuated
for the first time by advancing the fader, the
replay will start. When the momentary push-
button is actuated for the second time by
closing the fader, the player unit will be set to
pause.
START/ TACT
CUE
PAUSE
LOCK PLAY
Fig. 9 Fader start via momentary pushbutton
CUE PLAY = control via a pulse
When the fader is advanced, the replay will
be started from the title beginning (Auto Cue
point chapter 5.4.1) or from the Cue point
set with the button CUE (18) [
5.8.2] by a short control pulse of the mixer.
When the fader is closed, the player unit will
return to this starting point by another control
pulse and will be set to pause there.
START/ TACT
CUE
PAUSE
LOCK PLAY
Fig. 10 Fader start via control pulse

7 Updating the Firmware

If a new firmware is available on the Internet, the
firmware of your unit may be updated:
1) On the home page of "img Stage Line"
(www.imgstageline.com),
Updates" under "SUPPORT". Then scroll
down to "FIRMWARE-DOWNLOADS".
For downloading, click the icon in front of
"CD-292USB".
Copy the software download onto a USB
stick.
2) Switch off the CD-292USB with the power
switch (28).
3) Insert the USB stick with the new firmware
into the left USB port USB 1 (26).
4) At the left player unit keep the button PROG
(13) pressed and switch on the player again.
Do not release the button PROG until the left
display shows "UP dA t E".
5) After reading in, when "Ready" appears in the
text line (O), press the button
the firmware update. By means of the bar-
graph indication (H) and the text line the
update can be observed. When "Finish" is
shown, the firmware has been updated.
6) Switch off the player and switch it on again.

8 Maintenance of the Unit

Protect the unit from dust, vibrations, humidity
and heat (admissible ambient temperature
range 0 – 40 °C). For cleaning only use a dry,
soft cloth, never use water or chemicals.
Note concerning sound interruptions and
reading errors
Cigarette smoke and dust will easily penetrate
through all openings of the unit and also settle on
1. × Start
2. × Pause
the optics of the laser sampling system. This
deposit may cause reading errors and sound
interruptions, the unit must then be cleaned by
skilled personnel. This cleaning will be charged,
even during the warranty period!
chapter
1. × CuePlay
2. × Pause
click "Software
(20) to start
All rights reserved by MONACOR
manual may be reproduced in any form or by any means for any commercial use.
9 Specifications
Frequency range: . . . . . 20 – 20 000 Hz
THD: . . . . . . . . . . . . . . . < 0.1 %
Channel separation: . . . > 80 dB
Dynamic range: . . . . . . > 80 dB
S / N ratio: . . . . . . . . . . . > 80 dB
Output: . . . . . . . . . . . . . 2 V (line level),
Readable file systems: . NTFS, FAT, HFS+
Anti-shock memory: . . . 15 s
Power supply: . . . . . . . . 230 V~ / 50 Hz
Power consumption: . . . 40 VA max.
Ambient temperature: . . 0 – 40 °C
Dimensions (W × H × D)
Control unit: . . . . . . . 482 × 90 × 85 mm,
Player mechanism: . . 482 × 90 × 260 mm,
Weight: . . . . . . . . . . . . . 6.5 kg
Subject to technical modification.
® INTERNATIONAL GmbH & Co. KG. No part of this instruction
GB
RCA jacks
2 rack spaces
2 rack spaces
15