Assembly And Adjustments; Installing The Machine - DeWalt DWE1622 Manual De Instrucciones

FIG. 1
D
2
1
H
A
N

ASSEMBLY AND ADJUSTMENTS

and disconnect it from power source before installing and
removing accessories, before adjusting or when making
repairs. An accidental start-up can cause injury.
F
tool.

Installing the machine

G
Assembling the feed handle (Fig. 1, 2)
The quick-release feed handle (F) can be mounted in one simple
operation both to the left and the right of the machine.
J
E
L
K
I
d
rl o a
o v e
M
B
C
31
WARNING: To reduce the risk of injury, turn unit off
WARNING: Prior to assembly and adjustment, ALWAYS unplug
1. Assemble the feed handle.
2. Mount the drill guard.
3. Fit the lubrication system as necessary.
4. Place the machine on a clean, level and solid surface. Remove
any particles that will obstruct full contact between the magnetic
stand and the mounting surface.
5. Fit and tighten the safety chain (O, Fig. 5).
1. Screw the handles (F) into the hub (G).
2. Keep the button (P) depressed while inserting the hub shaft into
the hole (Q).
3. Release the button.