Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2.2 - AIR CONTIDITONER OPERATION - GLW160 CONTROLLER- AIR
REFRESHMENT
When the ignition key is turned, the display will first show the controller's
software version, right after, the internal temperature of the vehicle. Before the
start the display will show the initials AL (see item 2.3.6)
4
1 – Numeric Display
2 – Ventilation control key (VENT)
3 – Cooling control key (REFRIG)
4 – Key (INCREASE)
5 – Key (DECREASE)
6 - Indicator "cooling mode"
7 - Indicator "automatic mode"
8 - Indicator "ventilation mode low velocity"
9 - Indicator "ventilation mode high velocity"
8
7
9
6
1
2
3
5
2.2.1 - COOLING MODE
1- To turn the equipment on, press the key (REFRIG).
The "cooling mode" will be automatically on according to the internal
temperature of the vehicle and the set temperature.
The cooling mode operation will be shown according to the described below:
a) Indicator (6) turned off informs that the "cooling mode" is off
b) Indicator (6) blinking informs that the equipment is running on
"ventilation mode"
c) Indicator (6) turned on informs that the "cooling mode" is on.
2- To shut the "cooling mode " press once again the key (REFRIG)
Whenever the systems initiates on "cooling mode" the evaporator's blowers
will start on "automatic mode". However, the ventilation velocities may be
changed manually (see item 2.3.2).
The evaporator's blowers are activated, in the automatic mode, according to
the set-point programming.
2.2.2 - VENTILATION MODE
The "ventilation mode" provides two operation velocities:
1- With the "cooling mode" shut, press the key (VENT) and the air conditioner
will work only on ventilation.
The indicator (8) will be on to inform that the ventilation is working at low
velocity.
2- To have the blowers working at high velocity, press (VENT) key again. This
function will be informed by having indicator (9) on."
3- Pressing the key (VENT) one more time, the "ventilation mode" will be
turned off.
Operation
22
Tabla de contenido
