Operation At The Unit - IMG STAGELINE TWIST-1LED Manual De Instrucciones

The following functions can now be controlled
with the remote control:
Function
Selection of a
gobo
Selection of a
colour
Brightness
Stroboscope
Show program
Show program
music-controlled
Light beam
on / off
⑦
Functions of the remote control

3.1.2 Operation at the unit

At the unit, a light show program can be
selected, or, in the manual mode, a gobo, a
lighting colour, the brightness and the beam
direction can be defined.
A – Selecting a light show program
1) Select a program
button UP or DOWN.
2) To change the settings for the program
selected, press the button ENTER:
will appear on the display.
3) Press the button ENTER again:
appear on the display.
4) All setting functions for the light show pro-
grams can now be selected with the button
UP or DOWN:
Display
⑧
Settings for the show programs
5) To change a setting, press the button
ENTER. The display will show the value
set (000 ... 255).
Note for the stroboscope functions
000 – 009 = stroboscope off
010 – 255 = stroboscope slow – fast
14
Buttons
GOBO + button 1 – 8
1 = no gobo
COLOR + button 1 – 8
1 = white, 8 = purple
DIMMER+, DIMMER–
STROBE + button 1 – 9
1 = off, 2 = slow, 9 = fast
SHOW + button 1 – 7;
to exit a program: FULL ON
on: SOUND ON
off: SOUND OFF
STAND BY
...
Function
speed
brightness
stroboscope
6) Change the setting with the button UP or
DOWN.
7) Save the setting with the button ENTER
(the display will briefly show
then return to the setting function), or dis-
card the setting with the button MENU.
8) To exit the setting mode, press the button
MENU repeatedly until the number of the
show program is shown again.
B – Manual mode
1) Select the manual mode
ton UP or DOWN.
2) Press the button ENTER:
on the display. Press the button ENTER
again; display:
3) All functions for the manual mode can now
be selected with the button UP or DOWN:
Display
with the
will
⑨
Settings for the manual mode
4) To change a setting, press the button
ENTER. The display will show the value
set (000 ... 255).
5) Change the setting with the button UP or
DOWN, and save it with the button
ENTER. The display will briefly show
(save) and will then return to the setting
function.
To discard a changed setting, press the
button MENU.
6) To switch from the manual mode to a show
program or to the DMX mode, press the
with the but-
.
Function
brightness
stroboscope
pan, coarse
pan, precise
pan speed:
000 = fast, 255 = very slow
tilt, coarse
tilt, precise
tilt speed:
000 = fast, 255 = very slow
colour, 176 – 255 = change of colour
slow fast
➞
gobo, 125 – 249 gobo shake effect
250 – 255 change of gobo
and will
will appear