2How To Use The Control Manager; 3General; 4The Source Selection Screen - Barco IQ PRO R210L Manual Del Usuario

15. Red iQ
Imagen 15-23
the control interface: the general subscreen is active (see toolbar)
15.5.2 How to use the control manager?
How to use the control manager?
1. Choose the subscreen by clicking on the desired item on the toolbar in the upper part of the control interface
The active subscreen is indicated with a blue spot
15.5.3 General
What can be done ?
Basic controlling, monitoring and general parameter setting of the projector can be done in this screen, imagen 15-23.
• 3 buttons ON, STANDBY and PAUSE
• The target information part gives the main characteristics of the projector
• 2 buttons allow to switch between dual and the single lamp mode
How to change the general settings?
1. Click on the lamp mode button to select the desired mode
A blue spot indicates the active mode
2. Click on one of the three buttons to start up, pause or put in standby the projector
A green led indicates the status of the projector.
15.5.4 The source selection screen
What can be done ?
• A source selection dialogbox allows to visualize all the sources or only the detected sources.
• 3 buttons to activate, freeze, pause and logo
• selection of 12 different switching effects
• selection of 3 different backgrounds: logo, Blue, Black
140 R5976694S IQ PRO R210L/350/500 20122003