1Connections - Barco IQ PRO R210L Manual Del Usuario

15. Red iQ
15.4.1 Connections
Front plate (Layer 3) layout
D
MIC IN LINE IN OUT
Imagen 15-2
iQ Pro front plate (network layer)
A audio connections : mic input, line input, output
B 4 x USB connection
C RJ45 connector for network connection
D PCMCIA slot
How to connect the Single Board Computer ?
1. Use the RJ45 connector to connect the SBC to the installed network
2. Use the USB ports to connect peripherals such as mouse, keyboard,... (imagen 15-3)
Nota: Keyboard access during pre-operating system boot (to access BIOS or F8 key to get operating system select menu) is
only supported on the bottom USB input connector next to the Ethernet connector
3. Use the PCMCIA slot to connect a Wireless LAN card or other optional inputs like Bluetooth, Modem cards,...
The slot is protected from dust by a slot door, open the slot door to insert a card.
Nota: recommended card type:
-The card should be a type II card.
-The card should be Windows
4. Use the Audio connectors to connect an audio source or microphone, the output allows to use an external audio peripheral such
as an amplifier etc.
Imagen 15-3
130
PC CARD
10/100 Base-T
USB
A B
TM XP compatible
C
R5976694S IQ PRO R210L/350/500 20122003