Troubleshooting; Faq Table - Barco IQ PRO R210L Manual Del Usuario

19. TROUBLESHOOTING

An Administrator password has been installed for security reasons (worm and virus protection):
Password : Barco (case sensitive !)

FAQ table

This table gives a summary of possible errors, the aim of this section is to give general guidelines and tips for troubleshooting.
19.1 FAQ table
What to do when... ?
Symptom
The projector is working
(operational mode) but Server
is not running
The projector is in standby mode
and the Server is not running
No client/server communication
in case of a point to point
communication
No client/server communication
over the LAN
When using the DropZone, the iQ
Pro server does not accept calls
from client(s)
When using the DropZone it is
impossible to launch/store files
PC card is not working or influences
the good working of the SBC
R5976694S IQ PRO R210L/350/500 20122003
Possible cause
• The Projector ON state
setting ( in the "iQ Pro
Server settings" menu)
• The Projector Standby
state setting ( in the "iQ Pro
Server settings" menu)
• IP address is not filled in
correctly
• Client configuration
• Netmeeting settings are
TM
incorrect
• No access the shared
folder "Received"
• incompatible PC card
Check
• The setting should be
"ON"
• The setting should be
"ON"
• IP address
• Client configuration:
projector name
• Netmeeting settings
TM
• check guest account
settings in Windows TM
• Check if the PC card
driver is compatible with
Windows TM XP
19. Troubleshooting
References
IT administrator
IT administrator
IT administrator
IT administrator
175