4Configuring The Client Software - Barco IQ PRO R210L Manual Del Usuario

15.4.4 Configuring the client software
How to start up the client software ?
1. Start up the previously installed client program
The interface shows 3 tabs (upper tab control ): Control, Diagnosis and Configuration
The active subinterface is the control subscreen (imagen 15-7)
2. Click on the upper menubar to select the desired subinterface
Imagen 15-7
Control interface
IP
Internet Protocol (Protocolo de Internet). Es la capa de red del protocolo TPC/IP Es requerido para la comunicación
en Internet.
How to add a projector to the projector list
1. Click on the white arrow (imagen 15-8)
A menu is dropped down (imagen 15-9)
2. click on the + sign of the projector list
A dialogbox is displayed (imagen 15-10)
3. Fill in the Name, the IP address (optional) and the Portnumber of TCP/IP connection
Nota: default portnumber = 9999
4. Fill in the alias
Truco: "Alias" is a custom name whereas "Name" is the name by which the projector is identified on the (corporate) network
5. Click OK to confirm or Cancel
The projector is now added to the list of projectors
R5976694S IQ PRO R210L/350/500 20122003
15. Red iQ
133