Harness Buckle; Fitting The Harness; Maintenance Advice - Foppapedretti GO! EVOLUTION Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
Close the lock-off across the diagonal belt (15).
Check that there are no kinks or twists in the seat belt.

HARNESS BUCKLE

To fasten the harness, bring the two shoulder straps together
into the buckle; you should hear a "click" (18). To release the harness, press the buckle's
red button (19).

FITTING THE HARNESS

To tighten the harness: Pull on the adjusting straps positioned on the harness. You do
not need to press on the adjuster buttons (20).
IMPORTANT: A correctly adjusted harness is essential for your child's protection. There
should not be more than finger's width between the harness and your child.
To loosen the harness: Press on the adjuster buttons positioned on the upper section of the
harness, grasp the lower section and pull simultaneously
RECLINING YOUR CHILD SEAT
Push the adjustment lever located under the front of the seat upwards, then pull or
push the base towards or away from you
STORAGE OF THE INSTRUCTION MANUAL
Store this instruction manual, depending on the model of your vehicle, either in the
pouch provided, or by slipping it into between the shell and the cover of the seat.

MAINTENANCE ADVICE

All the material parts can be removed. Slight stains can be removed using a damp
sponge soaked in soapy water or it can be washed by hand at 30° in soapy water. Do not
use bleach, do not iron, do not machine wash, and do not tumble dry.
WARNING
This car seat is a "Universal" child restraint system. It has been approved in accordance
with regulation N°44/04, and is suitable for general use in vehicles and is compatible
with the majority (some exceptions) of vehicle seats.
It is more likely that the seat is perfectly compatible if the vehicle manufacturer
states that its vehicles are suitable for taking "Universal" child restraint systems.
This restraint system is classified as "Universal" in accordance with the strictest
approval
criteria, whereas earlier models do not correspond to these new provisions.
It can only be adapted to vehicles with 3-point safety belts that are either fixed or
• ENGLISH •
(21).
(22).
16
(16) (17)
and insert them
Tabla de contenido
loading

Tabla de contenido