Ingersoll Rand 41 Series Manual Del Usuario página 22

PART NUMBER FOR ORDERING
35 Vane (5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46413–5
36 Rotor
Push Start models
for 800, 1000 and 1700 rpm models
(thru hole) hex drive . . . . . . . . . . . . . . . . . .
for 2500 rpm models
(thru hole) spline drive . . . . . . . . . . . . . . . .
Straight and Pistol Grip models
for 800, 1000 and 1700
rpm models (hex drive) . . . . . . . . . . . . . . . .
for 2500 rpm models (spline drive)
using Direct Drive or Adjustable
Ball Clutch . . . . . . . . . . . . . . . . . . . . . . . . . .
using Positive Clutch (thru hole) . . . . . . . . .
37 Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46311
38 Front End Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47722
39 Ball Bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Y65–13
40 O–ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Y325–214
41 Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46412
42 Locating Pin
for Pistol Grip models . . . . . . . . . . . . . . . . .
for Lever and Push Start models . . . . . . . . .
43 Sun Gear (1 or 2) (4.4:1 ratio) (15 teeth) . . . . . . . . . . . 46466
44 Planet Gear (3 or 6) (4.4:1 ratio) (18 teeth)
(requires item 45) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46900
45 Needle Bearing (3 or 6) . . . . . . . . . . . . . . . . . . . . . . . . . 42315
46 Carrier Assembly (4.4:1 ratio) . . . . . . . . . . . . . . . . . . . 46522
47 Spindle Assembly (4.4:1 ratio) (direct drive) . . . . . . . . 47270
48 Ball (included with items 47,
57, 61, 63 and 89) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Y16–204
49 Retaining Clip (included with items 47, 57, 61,
63 and 89) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47695
51 Ring Gear (double reduction)
46453
52 Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46496
46469 53 Ball Bearing
46454
54 Retaining Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38339
46470 55 Sun Gear (3.43:1 ratio) (21 teeth) . . . . . . . . . . . . . . . . . 46465
46469 56 Planet Gear (3) (3.43:1 ratio) (15 teeth)
(requires item 45) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46899
57 Spindle Assembly (3.43:1 ratio) (direct drive) . . . . . . . 47269
58 Carrier Assembly (3.43:1 ratio) . . . . . . . . . . . . . . . . . . . 46521
59 Sun Gear (2.89:1 ratio) (27 teeth) . . . . . . . . . . . . . . . . . 46464
60 Planet Gear (3) (2.89:1 ratio) (12 teeth) . . . . . . . . . . . . 46460
61 Spindle Assembly (2.89:1 ratio) (direct drive) . . . . . . . 47268
47723–1 62 Planet Gear (3) (6.67:1 ratio)
47723–2 (21 teeth) (requires item 45) . . . . . . . . . . . . . . . . . . . . . 46901
63 Spindle Assembly (6.67:1 ratio) (direct drive) . . . . . . . 47271
64 Ring Gear (single reduction)
65 Spindle Assembly (4.4:1 ratio)
PART NUMBER FOR ORDERING
for Straight models . . . . . . . . . . . . . . . . . . .
for Pistol Grip models . . . . . . . . . . . . . . . . .
for Cushion and Auto Shut–Off
Clutch models . . . . . . . . . . . . . . . . . . . . . . .
for Direct Drive and
Positive Clutch models . . . . . . . . . . . . . . . .
for Straight models . . . . . . . . . . . . . . . . . . .
for Pistol Grip models . . . . . . . . . . . . . . . . .
for Cushion and Auto
Shut–Off Clutch models . . . . . . . . . . . . . . .
for Positive Jaw Clutch models . . . . . . . . . .
48904
48904
Y65–13
46243
48905
48905
47753
47799