Operation Process - B.A. International BA OptimaSurge OS500 Manual De Instrucciones

OPERATION PROCESS

(1) Turn on the main switch.
The set program 1 is selected and shown automatically.
(2) Choose the program.
By pressing the first left button on the pedal, the program changes by 1 stage.
Choose the needed program.
(3) Check the setting.
Check the display on LCD box to make sure the correct setting.
The number in the middle of LCD shows the speed. If pressing the speed/torque button on the foot
pedal, the mode is changed to display the torque.
(4) Start the operation.
The motor rotates pressing the speed control pedal. It runs at low speed with light press and at high
speed with heavy press by the set speed in max. If the irrigation mode is on, the pump operates also.
(5) Overload protection function
If the load exceeds the set torque during the use, the overload protection function works not to ge-
nerate the extra torque.
(6) Stop the operation.
The working is stopped by stepping out the speed control pedal.
(7) Change the operation direction.
Press the button on the foot pedal for the reverse direction.
If the reverse direction mode is selected, the beep sound is heard and it continues during the operation.
14
P
The program returns to number 1 after number 10.