Leckey Mygo Stander Manual Del Usuario página 35

Attach the grab rail receiving brackets (e) as
shown. Place the grab rail into the receiving
brackets. Adjust to the required height and
tighten (f) on both sides.
E
F
9.14 Tray Insert Changes
To swap out different inserts for tray, firstly,
turn the tray upside down, then remove Allen
bolts holding in the current insert (a) and
tray protection pad (if there is one). Remove
old insert (b) and replace with new one and
secure to tray and add tray protection pad
using same Allen bolts.
A
B