Reliable BRIO 250CC Manual De Instrucciones página 11

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

DANGER FROM OTHER CAUSES
Never leave the appliance exposed to the elements (rain, sunshine, etc.).
Never place the appliance on or near to sources of heat.
Make sure that the power cord does not come into contact with hot surfaces.
Never point steam jets in the direction of people, animals or plants or towards
appliances that contain electrical parts (e.g., oven interiors).
Never direct steam jets onto the appliance itself.
Never immerse the body of the appliance, plug or power cord in water or other
liquids; clean them with a damp cloth.'
Never use the appliance if the power cord or plug are damaged or if the appli-
ance is faulty / damaged.
All repairs, including the replacement of the power cord, must only be carried
out by Reliable corporation or technicians authorized by Reliable.
This appliance has been designed for domestic use only and may not be used
for commercial or industrial purposes. This appliance is for household use only.
During use, the appliance contains pressurised steam: improper use can be
dangerous. The appliance is designed for domestic use only, as stated in
the manual. The manufacturer cannot accept any liability for damage cause
through improper or incorrect use of the appliance.
When the appliance is not in use, always lock the steam dispensing button.
DANGER OF SCALDS
If the steam button is pressed before the boiler has reached the optimum tem-
perature, then water instead of steam could come out of the nozzle.
Never touch hot surfaces while using the product. Leave attachments to cool
before replacing them.
Even when the appliance is not in operation, unplug it from the power outlet
and leave it to cool before inserting or removing single parts or before
cleaning it.
NEVER OPEN THE CAP ON THE BOILER TANK DURING USE. BEFORE
UNSCREwING THE CAP ON THE BOILER TANK, PROCEED AS FOLLOwS:
Switch off the appliance at the main switch.
Bleed out the remaining pressure from the boiler tank, using the steam button
on the handle pointing the jet into a suitable container.
Leave the appliance to cool for a few minutes; slowly loosen the boiler tank cap,
part of the way and wait for a few seconds
Unplug the power cord from the power outlet.
07
Tabla de contenido
loading

Tabla de contenido