Troubleshooting; Problems, Causes, Solutions - Berkel BM +42F Serie Manual De Uso Y Manutención

7.3 - Putting the machine out of service
The machine has been manufactured using the following materials: stainless steel,
aluminium alloy and copper which do not require special process to be eliminated.
To eliminate the different parts of the machine in accordance with the different
materials, ask special authorised centres for separate collection of waste.

8 - Troubleshooting

8.1 - Problems, causes, solutions

Problems
1– The machine does not start
2– The screw propeller does not turn in the sense indicated by the arrow (on three-
phases model)
3– The product is not minced correctly
Causes
1- The differential switch is on position "0".
1– The outlet switch is on position "0"
1– The push-button "on" does not work.
1– The electrical motor is faulty.
2- The motor wires are inverted
3- The plate and the knife are not tightened correctly
3- There is some rust on the plate and knife, they do not stick perfectly to each
other (on the surface of the plate)
3- The feed opening is not installed correctly
Solutions
1- Turn the switch to position ."I"
1- Turn the switch to position "I"
1- Call the technical service centre
1- Call the technical service centre
2- Call the technical service centre (dealer).
3- Tighten correctly the plates and knife
3- Replace the faulty plate and knife
3– Fix correctly the feeding opening
18