Before Calling Forservice - Kenmore 911.47822 Instrucciones De Uso Y Cuidados

BEFORE CALLING FORSERVICE
To save you time and money, before making a service call check the list below
for any problem you may feel you have with the performance of your oven. If
the problem is something you cannot fix, use the Consumer Service Numbers
located at the back of this guide. When making any calls, have the Model
No., Serial No., Repair Parts list, Use and Care Guide and the Date of
Purchase available.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
The display of your
control is flashing "F"
followed by a number
or letter.
Oven malfunction.
Press the CLEAR/OFF
pad. Let the oven cool for
1 hour and enter an oven
or cleaning operation. If
code repeats, call for
service.
Oven and oven
control will not work.
No power to oven.
The clock is in the
black-out mode.
Check the circuit breaker
or fuse. Make sure the
power cord is plugged in.
See the "Setting Special
Features" section of this
manual.
Oven temperature
seems inaccurate.
Oven control calibration. See the temperature
adjustment instructions
following this section.
Oven will not
unlock.
Clean cycle is not
finished.
Oven temperature must
drop below the lock
temperature before the
door will unlock.
Oven light will
not work.
a,
bo
Light switch in off
position.
Oven light bulb
loose or burned out.
a. Check oven light
switch on the control
panel.
b, Check the oven light
bulb.
Oven did not clean
or results were poor.
a. Controls were not
set properly.
b. Oven was heavily
soiled.
c. Clean cycle was
interrupted.
a,
b.
C,
Check the self-cleaning
section of this manual.
Heavy spillovers should
be removed before the
cycle is set. You can also
repeat the cycle after
oven has cooled.
The normal clean cycle
should last 4 hours.
24