Technical Data - Urrea PA309A Manual De Usuario

1. ON/OFF SWITCH.
2. HANDLES.
3. BONNET PLATE.
OPERATION INSTRUCTIONS
APPLICATION OF PASTE OR LIQUID POLISH-
ING
Most polishing products are presented in a
paste or liquid. Read all instructions in the
product, for better and proper application.
1) If using pasta, dab a small part (about half
small spoon) on the cloth. Never dip the sur-
face to be polished directly with the pasta.
2) For liquid paste, apply a circle in the middle
of the cloth, and then two more large circles
outside of this.
3) After the first application, the cloth does not
absorb too much pasta, so to replace the paste,
do so only in a small amount.
SÍMB OL OS
PELIGRO, ADVERTENCIA, PRECAUCIÓN:
Indica un riesgo personal o la posibilidad
de un daño.
Herramientas tipo II: Doble aislamiento,
protege las herramientas eléctricas.
Lea el manual de usuario: Lea las instruc-
ciones contenidas en este manual.
HOW TO HOLD THE CLOTH
1
1) Loosen the cord / string running along the
cloth.
2) To position the cap, turn the unit upside
down, leaving up the working basis in this way
the machine will be positioned on the motor
housing.
2
3) Position the cloth over the gum base, and
make sure the cloth block the entire base.
4) Turn the machine to re-position it on the
base.
3
5) Adjust the cable / rope cloth, with a simple
knot, securing the cloth to the base improves.
6) Insert the remaining cord into the cloth.
7) To return to remove the cloth, just loosen
the cord / rope and pull gently.

TECHNICAL DATA

VOLTAGE-FREQUENCY
CAPACITY
SPEED
WEIGHT
POWER CONSUMPTION
SYM BOLS
DANGER, CAUTION, WARNING: Indicates risk of
personal injury and/or the possibility of damage.
Type II power tools: Indicates double insulation.
Read the user manual: Read all the instructions in
this manual.
E N G L I S H •
120 V ~ 60 Hz
9 1/2" (240 mm)
2500 r/min
2,8 kg (6,17 lb)
0,065 kWh
U s e r's m a nu al
7