Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TOOLS
INCLUDED:
[]
8 mm T-Wrench
[]
5 mm T-Wrench
[]
5 mm L-Wrench
[]
Screwdriver
PARTS INCLUDED:
[]
1 Console
Assembly
[]
1 Handlebar
Assembly
[]
2 Console
Mast Caps
[]
2 Console
Masts
[]
2 Main Frame Boots
[]
1 Hardware
Kit
[]
1 Safety Key
[]
1 Power Cord
[]
1 Audio Adapter
Cable
'_'
NEED
HELP?
If You have questions
or if
there are any missing
parts,
Contact
customer
Tech
Support.
Contact
information
is located
on the back panel
of this manual.
PRE ASSEMBLY
UNPACKING
Place the treadmill
carton
on a level flat surface.
It is recommended
that you place a
protective
covering
on your floor. Take CAUTION
when handling
and transporting
this
unit. Never open box when it is on its side. Once the banding
straps have been removed,
do not lift or transport
this unit unless it is fully assembled.
Unpack and assemble
the unit
where
it will be used. Never grab hold of any portion
of the incline frame and attempt
to
lift or move the treadmill.
Lift the treadmill
from the roller end caps area while a second
person
removes
the parts packed
under the treadmill.
,_WARNING
DO NOT ATTEMPT
TO LIFT THE TREADMILL!
Do not move or lift treadmill
from
packaging
until specified
to do so in the assembly
instructi0n s. You may
....
remove the plastic wrap fro m c0nse!e
masts,
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS
COULD RESULT IN INJURY!
NOTE:
During
each assembly
step,
ensure
that ALL nuts and bolts are in place and
partially threaded
in before
completely
tightening
any ONE bolt.
NOTE: A light application
of grease
may aid in the installation
of hardware.
Any grease.
such as lithium bike grease
is recommended.
Tabla de contenido
