Transportation And Handling; Unpacking - Fulgor Milano FBC 4005 TC X Manual Del Usuario

1.4 Transportation and handling

Loading and unloading of the appliance from
the truck must be performed by appropriate
means, such as a trolley, without which at
GB
least two people are required..
Warning! During handling operations every pre-
caution that may be necessary to avoid harm to
persons, property or to the appliance must be
observed. Specific instructions are given on the
package.
After removing the packaging, and before
any other operation, make sure the
appliance is free of damage. In case of
abnormalities do not turn on the appliance
and contact your dealer.
The materials of the packaging must be
disposed of according to the regulations in
the country where the appliance is used and
never dumped irresponsibly.
(fig.1)

1.5 Unpacking

Open the top of the box by bending back
the side flaps to operate more easily,
then remove the top cover and the side
polystyrene angle protection (fig.1). Remove
then the protective bag (fig.2), then, using
the appropriate lifting handles, remove the
equipment from the box by lifting it upwards
(fig.3).
(fig.2)
Lift the machine with a suitable tool, using
protective gloves, and place it in position.
Remove any protective film, removing any
traces of adhesive with a soft cloth and a
neutral detergent. Do not use scouring pads
or sponges that could irreparably scratch
the surfaces.
Warning! The materials of the packaging can be
potentially dangerous for children and animals.
4
(fig.3)