Preparation Before Use; Preparing Before Use - Gima 28075 Manual Del Usuario

PREPARATION BEFORE USE

1. Power Supply:
Prepare battery or optional power adapter.
1) Use the Battery
Open the battery cover (in the bottom of the main unit) along the
direction of arrow as shown in Fig. 1; install two AA batteries into
the battery compartment; close the cover.
Note: Please make sure that the polarity is correct.
Fig. 1
2) Use the Adapter
1) The output port (adapter connector) is connected to the adapter
plugholes under the back side of the main unit (see Fig. 2).
2) Connect its input port (Power Plug) to main supply.
Input voltage: AC 220V, 50Hz
Output voltage: DC 3V, 1A
ENGLISH
26
Adapter plughole
Fig. 2