Bosch SHE4AM Manual De Uso Y Cuidado página 135

Figure 3
10 place setting bottom rack
Figure 4
12 place setting bottom rack
Do not load the dishwasher with anything other than dishwasher-safe dishware and
kitchenware.
Top Rack Accessories
Top Rack Flip Tines
Flip Tines fold down to make loading the racks easier in some instances. Grasp the tines,
release from notch, and fold the tines downward. When the top rack is loaded, push it into
the dishwasher.
NOTE: When pushing the top rack into the dishwasher, push it until it stops against the back
of the tub so the top rack spray arm will connect to the water supply in the rear of the tub.
Do not push the top rack with the door.
Rack Height Adjustment (select models)
Remove the empty rack by pulling it out of the dishwasher to the point that it can be lifted
upward, as shown in Figure 5. Pull the rack outward and up until the rollers are completely
free of the roller guides. Re-insert the rack with the other set of rollers on the roller guides,
as shown in Figure 6.
Loading the Bottom Rack
Place large items in the bottom rack. Load pots, pans and bowls upside-down. Figures 3 and
4 show typical mixed loads for the bottom rack. Do not block the vent at left side of tub (see
Figure 7)
Bottom Rack Flip Tines
Flip Tines fold down to make loading the racks easier in some instances. Grasp the tines and
fold them downward.
Figure 5
Figure 6
Figure 7