1.
SPECIAL SAFETY INSTRUCTIONS
WARNING!
Do not work in the pump's range of action without wearing protective goggles and
adequate safety clothing.
Make sure that, besides the pressure regulator, the delivery circuit is fitted with a
safety valve of an adequate capacity.
Make sure that the pipes have been properly fixed before use. Check the
connections.
Make sure that all pipes are undamaged and free from dents.
Do not work without disconnecting the power take off (stop the pump).
Do not use the pump for inflammable or explosive liquids like gasoline, kerosene,
diesel oil, etc.
Do not use the pump with liquids that are not compatible with the material the
pump is made.
Do not use the pump at pressures exceeding the allowed maximum values.
Do not operate at a faster rotation speed than the one given on the pump label.
Install adequate protections for all the moving parts, such as the shaft and
pulleys.
Stop the pump, relieve the pressure from the system and flush out the circuit with
clean water before proceeding with any servicing work or inspections.
The pump must only be used at temperatures between 7 and 60°C (45-140°F).
Do not use liquids at temperatures exceeding 62°C or 145°F.
Do not disassemble the pressure accumulator before having completely relieved
the air in pressure through the relative valve.
Do not use the pump for liquids intended for human or animal consumption.
Do not store pumps that still contain dangerous liquid substances.
53