Menu Items - Sony VPL-HS1 Manual De Instrucciones

Menu Items

Adjustable items are limited according to the input signals. Items that cannot be adjusted are not displayed in the
menu. (1 page 42)
Menu Item
PICTURE CONTRAST
CTRL
BRIGHT
(brightness)
COLOR
HUE
SHARP
(sharpness)
RGB ENHANCER Adjusts the picture sharpness when computer signals are input.
D. (Dynamic)
PICTURE
GAMMA MODE
COLOR TEMP
COLOR SYS
(System)
VOLUME
INPUT DOT PHASE
SETTING
SIZE H
SHIFT
SCAN CONV
(Scan converter)
ASPECT
Description
The higher the setting, the greater the contrast. The lower the setting, the lower the
cotrast.
The higher the setting, the brighter the picture. The lower the setting, the darker the
picture.
The higher the setting, the greater the intensity. The lower the setting, the lower the
intensity.
The higher the setting, the more greenish the picture becomes. The lower the setting,
the more purplish the picture becomes.
The higher the setting, the sharper the picture. The lower the setting, the softer the
picture.
ON: Emphasizes the black color.
OFF: Reproduces the dark portions of the picture accurately, in accordance with the
source signal.
GRAPHICS: Reproduces the photos in natural tones.
TEXT: Contrasts black and white. Suitable for images that contain lots of text.
HIGH: Gives the white colors a blue tint.
MIDDLE: Gives the white colors a neutral tint.
LOW: Gives the white colors a red tint.
Select the color system of the input signal.
AUTO: NTSC
, PAL, SECAM and NTSC
3.58
Normally, set to this position.
PAL-M/N: PAL-M/PAL-N and NTSC
When the PAL-M, PAL-N or NTSC
AUTO, set to this position if the picture is distorted or colorless.
Adjusts the volume. It can be adjusted for each of the inputs selected with the INPUT
button.
When a signal from a computer is input, adjusts the picture for clearer picture after the
picture is adjusted by pressing the APA button.
When a signal from a computer is input, adjusts the horizontal size of the picture. The
higher the setting, the wider the picture. The lower the setting, the narrower the
picture.
As the setting for H (horizontal) increases, the picture moves to the right, and as the
setting decreases, the picture moves to the left. Use < or , to adjust the horizontal
position.
As the setting for V (vertical) increases, the picture moves up, and as the setting
decreases, the picture moves down. Use M or m to adjust the vertical position.
ON: Displays a computer signal according to the screen size. The picture will be
slightly softer.
OFF: Displays a computer signal as it is input. The picture will be clear but the picture
size will be smaller.
Note
When SVGA or XGA signal is input, this item will not be displayed.
4:3: Select when the 4:3 aspect ratio picture is input.
16:9: Select when the 16:9 aspect ratio picture (squeezed) is input from equipment
such as a DVD player.
* Squeezed: An original picture is recorded horizontally compressed, as shown in the illustration.
When you set ASPECT to 16:9, you can view the picture with16:9 aspect ratio.
Original picture
(16:9 aspect ratio
picture is
horizontally
compressed to be a
4:3 picture.)
(switched automatically).
4..43
(switched automatically).
3.58
signal is input with COLOR SYS set to
3.58
Menu Configurations
Displayed
picture with
ASPECT set to
16:9
19
GB