Tabla de contenido
Idiomas disponibles
Idiomas disponibles
E
H
B
A
J
I
Note: This Operator's Manual covers several models. Tractor
features may vary by model. Not all features in this manual are
applicable to all tractor models and the tractor depicted may
differ from yours.
Note: References to LEFT, RIGHT, FRONT, and REAR indicate that
position on the tractor when facing forward while seated in
the operator's seat.
Vehicle Control Module (VCM) (A)
Never leave a running machine unattended. Always disengage PTO, set
parking brake, stop tractor and remove power key to prevent unintended
starting.
The vehicle control module (VCM)
is located on the left fender of the
tractor seated in the operator's
position.
The VCM is the location of several
control buttons for your tractor.
The VCM inludes the START/STOP
button, PTO (blades ON/OFF)
button , Reverse Caution Mode
(RCM) button, Headlight button,
Cruise Control button, LCD Screen
and the Battery Level Indicator.
Prior to operating the tractor, refer to both Safety Interlock Switches
and Starting The Tractor in the Operation section of this manual for
detailed instructions regarding the VCM and operating the tractor in
REVERSE CAUTION MODE.
Start/Stop Button
Located on the VCM, the start/stop button is used
to start and stop the tractor.
OPERATION
C
F
D
G
Figure 12
WARNING
PTO
F
1
sec.
CAUTION
PTO (Blades ON/OFF) Button
Located on the VCM, the PTO button is used to engage
the blades. To operate, press the PTO button for one
second. The green indicator light below the PTO button
is illuminated when there is power to the cutting deck and the
LCD Screen displays "CUT DECK ON." Pressing the PTO button
again will disengage power to the cutting deck. The green
indicator light is not illuminated when there is no power to
the cutting deck.
Reverse Caution Mode (RCM) Button
Prior to operating the tractor, refer to the Operation section of this
manual for detailed instructions regarding operating the tractor in
REVERSE CAUTION MODE.
Located on the VCM, the RCM button allows the
tractor to be operated in reverse with the blade(s)
engaged. To activate the RCM, press the RCM button
down for three seconds. When activated, the red indicator
light is illuminated. To de-activate the RCM, press the RCM
button again. When the RCM is not activated, the red indicator
light is not illuminated. Refer to the Operation section of this
manual for more information on operating the tractor in the
reverse caution mode.
Note: Mowing in reverse is not recommended.
Use extreme caution while operating the tractor in the REVERSE
CAUTION MODE. Always look down and behind before and while
backing. Do not operate the tractor when children or others are
around. Stop the tractor immediately if someone enters the area.
Headlight Button
Located on the VCM, the headlight button is used to
turn the headlights on or off.
Cruise Control Button
Located on the VCM, pressing the cruise control
button while the tractor is in motion allows the
tractor to remain at a constant ground speed
without applying pressure to the forward drive
pedal, the LCD Screen displays "CRUISE ON" when
the cruise control is activated. The cruise control can be
RCM
F
disengaged by pressing either the cruise control button, the
R
brake pedal or the drive pedal. Refer to the Operation section
3
sec.
of this manual for detailed instructions regarding the cruise
control feature.
Note: Cruise control will not engage at the tractor's fastest
ground speed. If the operator should attempt to do so, the
tractor will automatically decelerate to the fastest optimal
mowing ground speed.
Note: Cruise control will not engage in reverse.
LCD Screen & Battery Level Indicator
Located on the VCM, the LCD display & battery level indicator
are used to provide instructions, warnings and information
about your tractor systems and the battery level of your
tractor.
13
CAUTION
WARNING
Tabla de contenido
