Tabla de contenido
68
5-25
5-26
5-27
5-28
Operation "MODE"
Code C0
Figure 5-25 setting operating modes preset by the
manufacturer
0*
=
No action
1
=
Set values preset by the manufacturer (state
1 is displayed only briefl y)
The operating mode selected can be obtained from
the permanent memory.
Code C1
Figure 5.7-4 Selecting the defi nition of the imbalance
Figure 5-26 Selecting the defi nition of the imbalance
value in steps from 0.05 or 0.25 oz. (respectively 1 or
value in steps from 1 or 5 grams (= from 0.05 to 0.25
3,5 grams).
oz.).
0*
=
0,25 oz (3,5 grams) defi nition
0*
=
5 gram (0.25 oz) defi nition
1
=
0,05 oz (1 gram) defi nition
1
=
1 gram (0.05 oz) defi nition
The operating mode selected can be obtained from
the permanent memory.
Code C2
Figure 5-27 Selecting the suppression of minor imbal-
ance values.
0*
=
Suppression OFF
1
=
Suppression ON
The operating mode selected can be obtained from
the permanent memory.
Code C3
Figure 5-28 Selecting the unit of measure for indicating
the imbalance (grams/oz) activated after the machine
has come on.
0
=
Value in grams
0*
=
Value in grams
1
=
Value in oz
1*
=
Value in oz
The operating mode selected can be obtained from
the permanent memory.
* = Preset by the manufacturer
Tabla de contenido
