The Input Setting Menu - Sony VPL-PX15 Manual De Instrucciones

Ocultar thumbs Ver también para VPL-PX15:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

COLOR SYS (System)
Selects the color system of the input signal.
AUTO: Automatically selects one of the following
signals: NTSC
, PAL, SECAM, NTSC
3.58
PAL-M/N: Automatically selects one of the
following signals: PAL-M/PAL-N, NTSC
Normally, set to AUTO.
If the picture is distorted or colorless, select the color
system appropriate to the input signal.
VOLUME
Adjusts the volume. The volume can be adjusted for
each of INPUT A, INPUT B (VPL-PX15 only),
VIDEO and S VIDEO input.
Input signals and adjustable/setting items
Item
Video or
S video (Y/C)
CONTRAST
BRIGHT
COLOR
(except for B & W)
HUE
(NTSC3.58/
4.43 only)
SHARP
RGB
ENHANCER
D. PICTURE
GAMMA
MODE
COLOR
TEMP
COLOR
SYS
VOLUME
: Adjustable/can be set
– : Not adjustable/can not be set
1) The RGB signals of a computer
.
4.43
.
3.58
Input signal
Video GBR
Component
RGB
The PICTURE CTRL Menu / The INPUT SETTING Menu

The INPUT SETTING Menu

The INPUT SETTING menu is used to adjust the
input signal.
Unadjustable items for a particular input signal are not
displayed in the menu.
When the video signal is input
INPUT SETTING
SHIFT
ASPECT:
When the RGB signal is input
INPUT SETTING
DOT PHASE:
1)
SIZE H:
SHIFT
SCAN CONV: ON
Operation
1. Select an item
Use the M or m key to select the item, then press the
, or ENTER key.
2. Adjust an item
• When changing the adjustment level:
To increase the value, press the M or , key.
To decrease the value, press the m or < key.
Press the ENTER key to restore the original screen.
• When changing the setting:
Press the M or m key to change the setting.
Press the ENTER or < key to restore the original
screen.
DOT PHASE
Adjusts the dot phase of the LCD panel and the signal
input from the INPUT A/B connector. Adjust the
picture further for a finer picture after the picture is
adjusted by pressing the APA key. Adjust the picture
to the point where it looks clearest.
VIDEO
H: 200
V: 30
16:9
Memory No.
NO.01
VIDEO/60
Signal type
INPUT-A
0
1056
H: 200
V: 30
Memory No.
NO.17
800x600
Signal type
29
(GB)
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Vpl-px10Vpl-ps10

Tabla de contenido