Audio Menu; Supplementary Information - Onkyo TX-8250 Serie Manual De Instrucciones

> Before Start > Part Names

AUDIO Menu

By pressing AUDIO on the remote
controller during play, you can adjust
frequently used settings, such as the sound
quality.
a
28
> Install > Initial Setup
1. Press AUDIO (c) on the remote
controller.
2. Select the item with the Up/Down
buttons (a) on the remote controller.
3. Select the setting value with the Left/
Right buttons (a) on the remote
controller.
0 To return to the previous display, press
RETURN (b) .
∫ Direct
Enable or disable the Direct feature which
outputs pure sound as it was intended by
bypassing the tone control circuits during
play.
∫ Bass
Enhance or moderate the bass range of the
b
speakers.
Select between j10 dB and i10 dB in 1
dB increments. (default value: 0 dB)
c
0 It cannot be set if the Pure Audio mode
or Direct mode is selected.
∫ Treble
Enhance or moderate the treble range of
the speakers.
Select between j10 dB and i10 dB in 1
dB increments. (default value: 0 dB)
0 It cannot be set if the Pure Audio mode
or Direct mode is selected.
∫ Balance
Adjust the balance of the sounds output
from the left and right speakers.
Select between Li10 and Ri10 in 1 steps
increments. (default value: 0)
> Playback
Supplementary information | Advanced Setup | Others