Network Settings (Wired); Network Settings (Wireless) - Eminent EM7195 hdMEDIA Manual De Usuario

7.6 Network Settings (wired)

If you have skipped the network settings during the initial setup, or you want to change
the network settings, you can use the following steps.
1. Go to 'Network' and press the 'OK' button.
2. Select 'Wired Lan Setup' if you have connected the EM7195 using a network
cable. If a DHCP server is available in your network, select 'DHCP IP (Auto)' and
press the 'OK' button to receive an IP-Address from the DHCP server.
3. Select 'Fix IP (Manual)' and press the 'OK' button if there is no DHCP server
active or in case you want to setup the IP-settings manually. If the manual option
is chosen, please make sure the IP-Address data is in range with the current
network.
4. Press the 'Return' button.
Note: If the wired or wireless network is not connected, it is normal for a message
'DHCP NOT READY' to appear in this menu.

7.7 Network settings (wireless)

The EM7195 can also be used wirelessly. In order to be able to use the wireless
connection, a wireless USB stick needs to be used. This wireless USB stick is not
supplied.
1. Insert the wireless USB stick. A notification saying the WIFI adapter has been
found appears.
2. Go to 'Network' and press the 'OK' button.
3. Select 'Wireless Setup' and press the 'OK' button.
4. Select 'Connection1' and press the 'OK' button.
5. Select 'Infrastructure (AP) and press the 'OK' button.
6. The EM7195 starts searching for wireless networks within range. The network(s)
will be shown.
7. Select you own network and press the 'OK' button.
8. If secured, you need to fill in the security key of your network. Enter the security
key and select the 'OK' button on the on screen keyboard. The select the 'OK'
button on the remote control.
9. The EM7195 tries to make a connection with your wireless network. If correct, a
overview with network settings appears.
10. Press the 'OK' button.
11. Press the 'Home' button to return to the main menu.
Note: If the wired or wireless network is not connected, it is normal for a message
'DHCP NOT READY' to appear in this menu.
32 |
ENGLISH