Chauvin Arnoux C.A 6030 Manual De Instrucciones página 45

1 10-position switch used to select the desired measurement function :
- OFF : Instrument off.
- RCD 10mA 30mA 100mA 300mA 500mA :
Testing of residual current devices having ratings of 10mA, 30mA, 100mA, 300mA
and 500mA.
- RCD var : Testing of residual current devices having ratings from 6mA to 650mA (rating
chosen in SET-UP mode, see §3.2)
- : Detection of direction of phase rotation
- : Current measurement
- SET-UP : Configuration of the instrument
WARNING : Set the switch to OFF when the instrument is not in use
2 7-key keypad :
WARNING : The functions of the various keys for all positions of the switch EXCEPT the SET-
UP position are explained here (for the SET-UP position, see § 3.2)
nd
2 key (yellow key)
+ press on another
nd
2
nd
2
TEST (SMOOTH) key
TEST
TEST
nd
+ TEST
2
SMOOTH
MORE (ALARM) key
MORE
nd
+ MORE
2
ALARM
key
=> access the secondary function of the key in question
(written in yellow italics below each key)
=> display the current time and date as long as the key is kept
pressed.
=> start and/or stop a measurement (except for voltage and
current measurements, which are made deirectly)
=> exit from the error mode.
=> compensation of the measuring cables
=> smooth the measurement (SMOOTH mode).
=> display the measurements and/or complementary
calculationsof a function, possibly in association with the
key .
=> activate/deactivate the "alarm" function.
=> display the measurements and/or complementary calculations
of a function, possibly in association with the key
45
.
MORE