Yamaha 9.9F Manual Del Propietário página 74

EMF62010*
N
PROCEDURE FOR TILLER CONTROL
MODEL
4) Place the gear-shift lever in the neu-
NOTE:
The start-in-gear protection device pre-
vents the engine from starting except
when in Neutral.
406042
5) Place the throttle control grip in the
503016
6) Attach the engine stop switch lanyard
w
8 Attach the engine stop switch lanyard
407022
8 Do not attach the lanyard to clothing
8 Avoid accidentally pulling the lanyard
3-11
tral position.
"START" position.
to a secure place on your clothing, or
your arm or leg. Then, install the lock
plate on the other end of the lanyard
in the engine stop switch.
to a secure place on your clothing, your
arm or leg while operating.
that could tear loose. Do not route the
lanyard where it could become entan-
gled, preventing it from functioning.
during normal
engine power means the loss of most
steering control. Also, without engine
power, the boat could slow rapidly.
This could cause people and objects in
the boat to be thrown forward.
GB
operation. Loss of