Description Of The Leds; Using The Recessed Panel (Kicm) - RHOSS KCMS/PCM Instrucciones De Uso

I.2.4

DESCRIPTION OF THE LEDS

The 3 LEDs on the unit (only for the BrioEV, Brio-I, UTNC-EV and
UTNC-I models) indicate the mac hine operati ng status. They can also
indicate the presence of a fault that inhi bits unit operation.
DL1 = Green
When s witched on after a power cut, all the LEDs remain ON for a few
seconds until the s ystem self-di agnosis is completed. If the unit is
running in SLEEP mode, the brightness of the LEDs is reduced by 50%.
DL1
Mode
Green
OFF Off
FULL AUTO (*)
COOL On
DRY On
FAN Off
HEAT Off
(*) Select this operati ng mode for the unit to set its elf to F AN mode
(Yellow LED on) for a s et ti me, after which the unit will deci de in which
mode (HEAT / OFF / COOL) to run.
The yellow LED remai ns on when i n the OFF mode, relati ve to the
FULL AUTO operation.
I.2.4.1 Alarms
If an alar m is triggered by a fault that inhibits operation, the LEDs that
go on determine the type of alar m. That with the highest priority
appears when a number of alarms have been triggered. T he alarms are
reset automaticall y.
DL1 DL2
(green) (yello w)
No.
DL2
DL1
DL3
- OFF OFF
01 OFF OFF
02 OFF BLINK
03 BLINK OFF
04 BLINK OFF
05 OFF BLINK
06 BLINK BLINK
07 BLINK BLINK
08 ON BLINK
09
ON
BLINK
10 BLINK ON
(*) if present
DL2
DL1
DL3
DL2 = Yello w DL3 = Red
DL2 Dl3
Yello w Red
Off Off
(*) (*)
Off Off
Off On
On Off
Off On
DL3
(red)
Meaning
OFF None
Probe ST1 is
BLINK faulty (room air
probe)
Probe ST2 is
OFF faulty
(water probe)
Probe ST3 is
OFF faulty (additi onal
coil water pr obe)
BLINK Anti-freez e
BLINK Overheating
OFF Fan
Remote s afety
ON
(SIC)
BLINK General alar m
ON
Faulty EEPROM
Serial board is
BLINK
offline (*)
I.2.5

USING THE RECESSED PANEL (KICM)

Recessed panel with LCD, designed to be mounted in rec essed boxes
and 3-module plates for manual or automatic regulati on of all unit
functi ons according to the preset room temperature, to be combi ned
with the KCMS electronic board.
Can be installed in rec essed boxes and 3- module plates:
BTicino
VIMAR
I.2.5.1 Description of the keys
Key
M
Priorit y
-
2 Notes:
If the padl oc k s ymbol is displayed, the keys are bloc ked, except for
certain func tions.
3
4
5
6
7
9
8
1
1
31
Living Inter national; Light; Light Tec h; Matrix
Idea; Idea Rondò; Plana
Meaning
Switc hes the fan coil on and off.
The key may be disabled in the pr esenc e of the
remote ON/OFF digital input or the hydronic
networ k.
Allows the desired mode to be s elected: Summer
(cooling), Winter (heating), Dehumidific ation, Fan
(ventilation) and automatic mode. The key may
be disabled in the pr esenc e of the remote
summer/winter digital input or the hydronic
networ k.
The fan rotati on s peed ( min, med, max,
automatic) is set by pressing this key repeatedly.
Sleep : the sleep function is acti vated when
pressed once and the durati on (hours) is set by
pressing the key again. Occupancy function:
this function is ac tivated by pressi ng the key
once or waiting for the sensor (if ins talled) to
detect the presence.
Increas e or decrease the desired Set-point
val ue.
SECTION I: USER