Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
Thank you for purchasing a SHARP air conditioner. Please read this manual carefully
before operating the product.
CONTENTS
• IMPORTANT SAFETY INSTRUCTIONS ... E-1
• PART NAMES ............................................ E-3
• SETTING DEODORANT FILTERS ............ E-5
• USING THE REMOTE CONTROL ............. E-6
• BASIC OPERATION .................................. E-8
• ADJUSTING THE AIR FLOW DIRECTION ...... E-10
• AIR OUTLET SELECTION ......................... E-11
• FULL POWER OPERATION...................... E-12
IMPORTANT SAFETY INSTRUCTIONS
WARNINGS FOR USE
1
Do not pull or deform the power supply cord. Pulling and misuse of the power supply cord
can result in damage to the unit and cause electrical shock.
2
Be careful not to expose your body directly to the outlet air for a long time. It may affect
your physical conditions.
3
When using the air conditioner for infants, children, elderly, bedridden, or disabled people
make sure the room temperature is suitable for those in the room.
4
Never insert objects into the unit. Inserting objects can result in injury due to the high
speed rotation of internal fans.
5
Ground the air conditioner without fail. Do not connect the grounding wire to gas pipe,
water pipe, lightning rod or telephone grounding wire. Incomplete grounding may cause
electric shock.
6
If anything is abnormal with the air conditioner (ex. a burning smell), stop the operation
immediately and turn the circuit breaker OFF.
7
The appliance shall be installed in accordance with national wiring regulations. Improper
cable connection can cause the power supply cord, plug and the electrical outlet to
overheat and cause fire.
8
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard. Use only the manufacture-
specified power cord for replacement.
WARNINGS FOR INSTALLATION/REMOVAL/REPAIR
• Do not attempt to install/remove/repair the unit by yourself. Incorrect work will cause electric
shock, water leak, fire etc. Consult your dealer or other qualified service personnel for the
installation/removal/repair of the unit.
• ONE-HOUR OFF TIMER ........................... E-12
• PLASMACLUSTER OPERATION.............. E-13
• TIMER OPERATION .................................. E-14
• MAIN UNIT OPERATION........................... E-16
• MAINTENANCE ......................................... E-16
• ADDITIONAL NOTES ON OPERATION .......... E-19
• TIPS ON SAVING ENERGY ...................... E-19
• BEFORE CALLING FOR SERVICE........... E-20
E-1
Capítulos
Tabla de contenido
